Heating Stuck On
********* Disclaimer **********
Any installation and or wiring advice given in this is guidance only. Ultimately the responsibility for the correct and safe installation lies with the installer. If a domestic installation, Part P of the building regulations must be complied with, usually by ensuring that the wiring complies with IEEE wiring regulations.
********* Disclaimer **********
Lets check the wiring (Ignite Wireless)Remove the central heating cable from the terminal 3 (CH ON) as shown on diagram. (Note, your wiring may differ from the picture below)
Is the heating still on? (Put the wire back after completing this test)
Yes No Back Restart