Heating Stuck On
********* Disclaimer **********
Any installation and or wiring advice given in this is guidance only. Ultimately the responsibility for the correct and safe installation lies with the installer. If a domestic installation, Part P of the building regulations must be complied with, usually by ensuring that the wiring complies with IEEE wiring regulations.
********* Disclaimer **********
Lets check the wiring (Ignite Wireless)
Remove the central heating cable from the terminal 3 (CH ON) as shown on diagram. (Note, your wiring may differ from the picture below)
Is the heating still on? (Put the wire back after completing this test)
Yes No
Back Restart
Any installation and or wiring advice given in this is guidance only. Ultimately the responsibility for the correct and safe installation lies with the installer. If a domestic installation, Part P of the building regulations must be complied with, usually by ensuring that the wiring complies with IEEE wiring regulations.
********* Disclaimer **********
Lets check the wiring (Ignite Wireless)
Remove the central heating cable from the terminal 3 (CH ON) as shown on diagram. (Note, your wiring may differ from the picture below)
Is the heating still on? (Put the wire back after completing this test)
Yes No
Back Restart
Summary
What type of System do you have?
Ignite LITE Wireless
Ignite LITE Wireless